HOME
PAGE
ABOUT
US
PRODUCTS
PARTS
USED
EQUIPMENT
ON-LINE
FORMS
CONTACT
US
E-MAIL
US NOW |
x
TM-60 SEMI-AUTOMATED
TABLE BLAST CABINETS
|
The
TM-60 Ruemelin 60" Diameter Semi-Automated Table Blast Machine features:
-
60" diameter rotary table powered
by a 1/4 HP DC gear motor, single phase, 60 hertz, 115 volts, with a solid
state variable speed control to provide a speed range of 0 to 4.5 RPM
-
Variable speed gun oscillator
powered by a 1 HP DC gear motor, single phase, 60 hertz 230 volts, with
a solid state variable speed control to provide approximately 3 cycles
per second and adjustable stroke of 0 to 6". The oscillator will
hold 8 guns.
-
(8) Type "B" Ruemelin high efficiency
suction blast guns with steel air jets and ceramic nozzles sized to suit
your compressed air volume (Cabinet hopper has provisions for 10 guns.)
-
(1) 24" adjustable air knife
at the exit opening
-
Airline filter for air knife
-
Pressure regulator with gauge
for air knife
-
Master air manifold with pressure
gauge, individual control valves for each blast gun, solenoid valve for
main manifold and air solenoid valve for the air knife. (Manifold
has provisions for 10 guns.)
-
Airline filter
-
Pressure Gauge
-
Entrance and exit vestibule
openings to be approximately 12" x 18" and protected by two 4-ply rubber
apron strips
-
Fluorescent light fixture
-
Viewing window on each of the
two rear access doors protected by a replaceable steel sight screen and
a rubber-lined steel slide-up shield
-
Quick opening door latches on
rear doors
-
Interlock switches on rear access
doors to help prevent accidental blasting when doors are open
-
Heavy-duty 5/16" thick perforated
table plates below the main turntable to help prevent parts from falling
into the abrasive hopper and to facilitate fixturing of extra guns off
the oscillator
-
Heavy-duty rimmed perforated
cast iron table segments that are individually replaceable
-
1/2" thick rubber table mat
perforated to match the perforations on the above table segments
-
Main shell of blast cabinet,
hopper, and doors to be fabricated of 7-gauge steel
-
Interior of blast cabinet to
be lined with 1/8" thick jade rubber
NEMA
12 Control Panel includes:
|
Ventilation
Equipment
|
-
Fused disconnect switch
-
Control Transformer (incoming
voltage to be determined by customer
-
Air manifold start/stop push
button
-
Fan Start/stop push button
-
Table rotate start/stop push
button
-
Oscillator start/stop push
button
-
Lights on-off switch
-
Air knife on/off switch
-
Indicator lights as required
-
Table speed potentiometer
-
Oscillator speed potentiometer
-
Emergency stop push button
-
Table jog momentary button
-
Starter with overloads for
fan motor
-
Starter with overloads for
shaker motor
-
(2) Timers for the dust filter
bag shaker control
-
Relays as required for latching
and control switching
-
All components of the blast
machine to be factory wired
-
NEMA 12 enclosure
|
#550 Ruemelin Assembled
Dust Filter fitted and furnished with:
-
550 Sq. Ft of active filter
cloth area
-
(1) 1/3 HP electric bag shaker
motor, ODP, 3 phase, 60 hertz, 230/460 volts
-
Welded steel hopper with
rubber seated, counterweighted dump valve
-
Steel leg supports to provide
a 17" hopper valve clearance
-
(1) #9 Package Fan with complete
weather/moving parts covers, adjustable V-belt drive, and 5 HP motor, ODP,
3 phase, 60 hertz, 230/460 volts
-
Top Mount Kit to mount the
above package fan on top of the dust filter with reinforcing rails and
necessary ductwork from the outlet of the filter to the inlet of the fan
-
Ventilation manifold to connect
the two outlets of the blast machine to a common round duct (ductwork to
filter by customer)
|
|

xx
|
Model TM-60 Shown
SPECIFICATIONS
|
Overall Height |
89 15/16" |
Overall Width |
87 7/8" |
Exterior Depth |
71 1/4" |
Weight |
4025 Lb. |
Construction |
7 Gauge Steel |
Table Size |
59 1/2" Diameter |
Interior Lighting |
2 - 15 W. Fluorescent |
Table Loading |
Piece Size:
12" x 18"
Weight: 40 Lbs per Piece
or 800 Lbs. Total |
Blasting Guns |
(8) Type "B" Guns |
Air Jets |
3/16" Orifice |
Nozzles |
Ceramic 3/8" Orifice |
Table Speed |
0-4.3 RPM |
Oscillator Speed |
0-2.3 Cycles per Second |
Ventilation Requirements |
2400 CFM; A Ruemelin
DF755/550 Dust Filter is Highly
Recommended |
OPTIONAL
EQUIPMENT
|
Air Jets |
1/8, 7/32, 1/4 |
Nozzles |
Ceramic 1/4" Orifice
(Special
Order), Ceramic 1/2" Orifice,
Tungsten Carbide 3/8", 1/2"
Orifice, Boron 3/8", 1/2" Orifice |
Rubber Table
Pad |
Totally Rubber
Lined Cabinet |
(2) Additional
Type "B" Guns |
|
|
|
xx
Air
Consumption Chart Per Blast Gun (CFM)
|
Size
of Air Jet
|
Gauge
Pressure (PSI)
|
60
|
70
|
80
|
90
|
100
|
1/8"
|
17
|
19
|
21
|
23
|
26
|
3/16"
|
38
|
43
|
48
|
53
|
58
|
7/32"
|
52
|
59
|
66
|
74
|
87
|
1/4"
|
67
|
76
|
85
|
94
|
103
|
Air Knife:
50 C.F.M. @ 50 P.S.I.
|
|
|
|
|
|
|